Hello, welcome to the official website of Wuhan Xinlaifu Hydraulic pneumatic Equipment Co. LTD
Hot keywords:

Rexroth hydraulic pump hydraulic pump station plunger pump hydraulic station system variable plunger pump


About us
Main products


Your position: Home page > 公司新闻

What maintenance should be done for plunger pumps

Time:2020-8-14 Click:1996 times
There are many maintenance tasks for plunger pumps, and I will talk to you about it below.
1. Regularly check the plunger for scars and corrosion, and replace it if necessary.
2. Check the fit of the plunger pair. If the plunger can slide slowly under its own action when the plunger is tilted about 60°, it means that the fit is good.
3. Check the tightness of the plunger pair to see if the plunger pair needs to be replaced.
4. Check whether the auxiliary pressure reducing ring belt of the oil outlet valve is worn out and there are steps or scars, and then replace the auxiliary pressure reducing ring belt of the oil valve according to the seriousness of the situation.
5. Check the gap between the plunger flange and the groove of the control sleeve to ensure that it is between 0.02mm and 0.08mm. If it exceeds 0.12mm, the control sleeve needs to be replaced.
The above is the overhaul of the plunger pump. Have you understood?
Return: 公司新闻
Product navigation

Home page  REXROTH  About Us  News Center  Download Center  Product Center  Site Map  XML Map

Wuhan Xinlaifu Hydraulic pneumatic Equipment Co. LTD

Tel: 027-85849187? Fax: 027-85849186? Pgone: 13971340391

Email: wh@rexroth-hyd.com? QQ:2909698088

Address: No. 28-30, Building 7, Hubei Modern Hardware & Electrical City, Dongxihu District, Wuhan

Factory address: Shenghua Industrial Park, Xincheng 12th Road, Dongxihu District, Wuhan


鄂公网安备 42010302001238号

You are the 1327717th visitor

XML 地图 | Sitemap 地图